What are the specifications of wire mesh foam remover, the price of the product is how much? What are the manufacturers of wire mesh defoamers? Specific specifications and prices can be consulted Anping Warner filter factory consulting http://www.huanawl.com/wire mesh defoamers are also known as gas-liquid filters, also known as bursting nets, defoamers, defoamers, trap nets, defoamer screens, gas-liquid filters, it is a kind of wire mesh woven by crochet. The diameter of stainless steel wire is usually Φ0.12 mm ~ φ0.30 mm. The width of wire mesh is: 100mm, 150mm, 300mm, 400mm, 500mm, 550mm, 600mm The mesh sizes are: 2 * 4mm, 4 * 5mm, 7 * mm and so on. The woven mesh surface is pressed with 20 ~ 45 degree bevel angle 4 ~ 7mm deep ripple. Vapor-liquid filter net is widely used in the following processes: oil, chemical, light industry, medicine, metallurgy, spaceflight, ship, environmental protection engineering, such as distillation, evaporation, absorption of foam, gas-liquid separation, gas-water separation, oil-gas separation of mechanical equipment. The defoamer is made in the tower body to break the bubbles and reduce the bubbles to liquid droplets to ensure the efficiency of mass transfer, reduce the loss of valuable materials, reduce the volume of the tower or container, and improve the working conditions of the equipment. Metal wire mesh foam remover material can be divided into stainless steel, copper, brass and other metal wire: a variety of stainless steel wire, galvanized iron wire, copper wire, nickel wire, titanium wire, alloy wire; non-metal wire: Nylon Wire, polyethylene wire, polypropylene F46 glass fiber (air-liquid mesh, also known as foam mesh, woven mesh) , is a special form of woven mesh, it is the production of metal wire mesh defoamer, oil and gas separator, dust removal, environmental protection, engine noise, mechanical shock absorption and other major components used in engineering, it is also widely used in gas vehicle industry and electronic industry.
The stainless steel air-liquid filter screen can be single-strand braided, multi-strand braided, metal wire and non-metal wire (or all kinds of fibers) mixed braided, according to the needs of the use of wire screen can be rolled into a variety of patterns and specifications of corrugated. Such as“People” word pattern. The standard network width of gas-liquid network is 100mm, 150mm, 300mm, 400mm, 560mm, 700mm, 800mm. The maximum network width that our factory can produce at present is 1500mm. Our factory has a full range of domestic specifications and models of gas-liquid filter screen machine and a variety of auxiliary machinery, can basically meet the needs of domestic and foreign users. The www.huanagl.com range: 0.10 mm-0.55 mm (0.20 mm-0.25 mm is the most commonly used warp) . 2. Hole size: from (2 × 3mm) to (4 × 5mm) to (12 × 6mm) , the hole size can also be fine-tuned according to customer requirements. 3. The surface condition of the gas-liquid filter screen: the flat screen and the corrugated screen (the width and depth of the corrugated screen have different specifications)4. The width range of the gas-liquid filter screen: 40mm, 80mm, 100mm, 150mm, 200mm, 300mm, 400,500mm, 600mm, etc. . 5. The main material of air-liquid filter screen: stainless steel wire has AISI 201,202,301,302,304,304 L, 321,316,316 L, pure nickel wire, pure titanium wire, Monel, galvanized wire, modified wire, stainless steel wire and cotton or plastic, PP, PC, PE, PVC, PTFE.
HG/T21618 -1998 wire mesh defoamer for gas-liquid filter screen specifications are: SP, DP, HR, HP four standard specifications. The specifications of gas-liquid filter for metal wire mesh defoamer are: HG5-1404, HG5-1405, HG5-1406, and the standard number is Shanghai Q/Sg12-1-79. Three types of gas-liquid net are specified in the standard, namely, standard type, high efficiency type and high penetration type. For users to provide a variety of non-standard woven mesh, such as multi-strand braiding, various shapes of gasket, casing, etc. , we can be customized according to the size of the mesh and diameter diameter. Application Fields: the production of metal wire mesh metal wire defoamer pad; gas-liquid separation, gas-water separation, oil-water separation and other devices of the filter screen; cars, tractors and other engines on a variety of filter; Sealing, shock absorption (shock absorption) , silencing and exhaust cleaning elements in automobile parts; shielding device for electronic and electrical products against electromagnetic interference; Screen Mist Eliminator is used to remove the mist droplets (fog droplets) entrained in the gas, recycle expensive droplets (precious materials) , or purify the gas to reduce impurities in the gas.
Wire mesh mist eliminator is usually made of φ0.10 mm ~ φ0.28 mm wire or engineering plastics (PP, PTFE, FEP, PVDF, etc.) . The wire mesh is woven by special warp and weft method, and then the wire mesh is pressed into wavy pattern with certain angle. Made of corrugated wire mesh with a variety of specifications and sizes. The mechanism of wire mesh mist eliminator is that when the small liquid mist droplets entrained in the gas phase pass through the wire mesh of the wire mesh mist eliminator, the mist droplets touch the wire mesh and are adhered or adsorbed, under the action of gravity, the droplet moves down the crossing point of the braided wire mesh and the silk, and at the same time continues to absorb the droplet carried in the gas, the growing droplets flow to the bottom of the wire mesh of the mist eliminator and fall down by their own gravity. In fact, during the absorption process, because the entire interior of the wire mesh eliminator is filled with adsorbed droplets, it enhances the adsorption capacity of single metal or engineering plastic wire, so that the defogging rate of defogging wire mesh is greatly increased in normal and normal operation, and can effectively adsorb and remove the very small droplets. The screen mist eliminator has the advantages of small pressure drop, large specific surface area and high mist removal efficiency. For the droplet above 3 μm, the efficiency of defogging can reach above 98% . Wire mesh mist eliminator is widely used in: petroleum, chemical, light industry, medicine, metallurgy, aerospace, ship, environmental protection engineering, such as distillation, evaporation, absorption process of gas-liquid separation, gas-water separation; Oil and gas separation of mechanical equipment.