How should the stainless steel filter screen equipment in the laboratory be installed and used?

Everyone already knows a lot about stainless steel filters. Today, let's learn about how to install and use the stainless steel filter equipment used in the laboratory, so next we on the installation of stainless steel filter screen steps, I hope that through our introduction, we can give you some help. Installation principle of stainless steel filter screen equipment: Ultra-clean stainless steel filter screen according to the direction of air flow into vertical flow ultra-clean stainless steel filter screen and horizontal flow ultra-clean stainless steel filter screen, according to the operation structure is divided into single-side operation and double-side operation two forms, according to its use can be divided into ordinary ultra-clean stainless steel filter and biological, ultra-clean stainless steel filter. Its working principle is: through the fan air into the pre-filter, through the static pressure box into the high-efficiency filter filter filter, the filtered air to the state of vertical or horizontal flow out, so that the operation area to 100 degrees of cleanliness, ensure the requirement of environmental cleanliness in production. In order to ensure the cleanliness of super-clean stainless steel filter screen, we have to replace the high-efficiency air filter when it reaches the final resistance, now to introduce the installation of super-clean stainless steel filter screen high-efficiency air filter.

The stainless steel filter screen equipment attention use: is applies in each kind of local clean environment, is carries on the biotechnology research and the experiment one of essential basic equipment, this equipment applies in the biological pharmacy, the biochemistry, environmental Monitoring and electronic instruments for air purification in operation areas. It is designed to meet the requirements of local work area cleanliness in the fields of modern industry, photoelectric industry, biopharmaceutical and scientific research. The concrete operation steps of the stainless steel filter screen equipment are mainly concerned with turning off the main power supply of the super-clean stainless steel filter screen, leaving it in non-operation and not working, removing the original high-efficiency filter fixed pressure piece, and removing the old high-efficiency filter, open the new HEPA filter package and install the HEPA filter according to the installation instructions. Restart the ultra-clean stainless steel filter, check if there is any leakage with the particle counter, and confirm the seal, put back the original stainless steel filter net flow plate re-opened the super-clean stainless steel filter net for cleanliness testing, after passing the completion. The above is the laboratory stainless steel filter screen equipment should be how to install the use of the steps and precautions. This article is from stainless steel filter manufacturers http://www.huanawl. com/more content please stay tuned.