Three Principles should be considered when designing stainless steel filter element

The design of stainless steel filter need to consider three principles, as we all know, stainless steel filter has always been in industrial production can not be lacking, and this device three major performance you know? This in our actual use of the role can be very large, let's take a look at it! Filtration accuracy the so-called filtration accuracy refers to the stainless steel filter for different sizes of particulate pollutants removal capacity, commonly used indicators such as filtration accuracy, filtration ratio and filtration efficiency to assess, in addition, filtering accuracy can be divided into coarse, ordinary, fine grade. Second, the capacity of fouling stainless steel filter in the pressure drop greater than its specified limit before the interception of pollutants known as fouling capacity, expressed by weight (g) . The greater the fouling capacity of equipment, the longer its life, so it is an important indicator of the life of equipment. Third, pressure drop characteristics of the filter system for the oil is a liquid resistance, so the oil through the inevitable pressure drop. In general, when the size of the filter element and the flow of oil is constant, the higher the filter accuracy, the greater the pressure drop. Under a certain flow rate, the larger the effective filtering area of the filter element or the smaller the oil viscosity, the smaller the pressure drop. The large pressure drop allowed by the filter element of the stainless steel filter is based on the principle of avoiding structural damage of the filter element. The article comes from stainless steel filter http://www.huanawl. com/, reproduced please indicate the source.