CN
If you want to use the dust filter cylinder correctly and safely, as a worker, you need to pay attention to many matters. Most users do not know the equipment very well, but its range of use is very, as a filtering equipment, its appearance to create a good working and living environment for people, improve the quality of life. The following is a simple understanding of the use of dust removal filter cylinder matters needing attention.
Use dust removal filter cartridge production workshop, will certainly have more potential safety problems, some production workshop will be has the flammable and explosive gases such as CO and H2, so before using this equipment, must determine the system number and reliable seal, in addition to choose accessories parts when should pay attention to quality and brand, at the same time also should pay attention to the actual operating equipment. Priority, dust filter cartridge safety and explosion-proof measures. According to the general situation, if used to deal with combustible gas bag filter, then the equipment will be designed as a round, if it is to deal with dust, then the dust filter cylinder of ordinary structure is enough to use.
Second, pipeline safety valve. Under normal circumstances, the upper safety valve is installed on the top of the flue, the normal production of the gland buckle down, water to keep the seal. If in the process of use, there is intense combustion in the flue, do not worry, because the pressure is greater than the weight of the gland, emergency break the gland, start to relieve pressure can be. If the lower safety valve is designed before the machine, during normal production, the gland will close the relief air, in case of a guarantee, the gas can also break through the copper plate, and then open the gland, for a good relief.
In the process of using dust removal filter cylinder, the flue gas pipeline should avoid dead corners as far as possible. If the pipeline can be kept unimpeded and the speed of airflow can be improved, the phenomenon of gas retention can be effectively prevented. For safety, it is recommended to set a safety valve on the pipe in front of the fan. If there is an explosion, it can also relieve the pressure urgently at any time. This is also one of the ways to safely use the dust filter cylinder. The above several matters needing attention tell the staff that the use of dust removal filter cylinder should be paid attention to, and some small details can not be ignored. Sometimes, the details are often easy to cause serious problems. From equipment maintenance to correct use, every link should be operated and managed by professional staff. This article from stainless steel filter http://www.huanawl.com/ do not reprint without permission.