The performance of air outlet filter is analyzed in many aspects

As we all know, in the filter equipment, filter product equipment is not less, and how much do we know about this equipment? In today's article we make a multi-faceted analysis of the performance of the equipment for you!


1. Installation is for better use, so it is necessary to connect the air inlet and outlet in accordance with the correct method marked on the product; 2. If it is to solve the oil and water problems of branch pipelines and terminal equipment, the installation should be as close as possible to the terminal equipment; 3. When the equipment is installed in the main pipe of the air compressor station, it should be at least 10 meters away from the air compressor outlet; 4. It is appropriate to install in the position where the pipe temperature is lower. If the inlet temperature at the installation position is higher than 60°C, it is recommended to install a rear cooler in front of the equipment.


Second, the necessity of the filter used for compressed air is often used as a kind of energy and power, compressed air has the characteristics of safety, flexible, easy to get, but in order to reduce the cost of operation to improve the efficiency of work, it is necessary for compressed air purification, is mainly through the elimination of the water, steam, oil mist, exhaust gas and other harmful substances, Improve the efficient use of this energy. And what we call a harmful substance is refers to the compressed air in the oil, metal, carbon, piping materials such as rust, if compressed air mixed with the material is likely to cause the paralysis of system, which affects the whole process of industrial production, this filter is used for compressed air purification is very important.


1. The dew point of compressed air is a temperature quantity, so at this temperature, the actual amount of water vapor in compressed air is equal to the ability to maintain water vapor, so this temperature is the dew point of air. 2. Relative humidity refers to the ratio between the actual water content in the air and the ability of the air to retain water, so the expression method of relative temperature is a percentage value. After the detailed analysis of the above three aspects, we have a more in-depth understanding of this filter? In fact, this is also one of the necessary equipment in our modern life, so it is important to understand its performance! This article is from the filter manufacturer http://www.huanawl.com/. It is forbidden to reprint without permission.