Why does the filter tube of the same material differ greatly from different manufacturers

After the filter tube we are more familiar with, today we will talk about, the same material of the filter tube why different manufacturers are very different. Stainless steel cartridge filters out many of the same material welding quality of the products is different, the main reason lies in the grasp of welding technology, in order to solve this problem, a lot of friends may ask how to do this procedure and good welding to solve this problem, anpingxian worldcom warner HNST from more than ten years production has accumulated a lot of practical production experience, Today to share the method to ensure the stainless steel filter cylinder welding firm, at the same time to make the product can be more solid. Two, the stainless steel filter cylinder produced by us in industrial manufacturing is made of stainless steel wire mesh, stainless steel punching net, stainless steel plate net. Its structure is generally divided into: stainless steel wire mesh welded into a cylinder; Stainless steel mesh stainless steel punching mesh frame; Wire mesh steel mesh frame.


3. Before welding, in order to ensure the scale accuracy and welding effect of the filter cylinder, a set of moulds is required, which is copper rod. A copper rod is made according to the inner diameter of the filter cylinder and installed on the welding machine. It must be noted that the temperature, speed and strength should be well grasped while welding the filter cylinder, so that the welding process can be beautiful and the welding product can be solid.


Four, stainless steel filter canister style is varied, the filter on the above mentioned we have a plenty of alone welded together, have a plenty of selection of single punching net, have a plenty of double layer or multilayer combination, whether it is a kind of when welding, we must pay attention to the before production, we must adjust the welding current is in place, In order to avoid the phenomenon of missing welding or welding current is too large, the situation of multi-layer combination, we need to choose different welding process according to the material and thickness, spot welding, argon arc welding or ion welding, reasonable selection we can weld the product solid and perfect. Hope that through the introduction of the above let everyone can buy the desired products.